ph level always low | ehottubsandpools

ph level always low

With swimming pool season approaching its time for the posts to switch to pool information. The info I’m going to give in this post is about total alkalinity. Most of the new customers that come to my store are unaware that total alkalinity is somthing they should be testing in their pool and spa water. Most new customers are introduced to total alkalinity when they bring in a water sample to be tested. Usually they are having a problem keeping their PH in an acceptable range. The problem is that no matter how much PH up is added to the pool, the level always seems to be low. When I hear this the first thing I test is the total alkalinity of the water. What happens is the total alkalinity drops below the recommened level for their pool and this drags the PH level down also. You can adjust the Ph of your swimming pool to the correct level and within a day or two it will drop back down if the total alkalinity of the water is to low.

Different types of swimming pool surfaces require diferent levels of  total alkalinity. A vinyl liner swimming pool needs the water to have a total alkalinity level of  125. A concrete, gunite, or fiberglass pool (or hot tub) needs a total alkalinity level of only 80. It is extemely important to keep the total alkalinity at these levels. they can be a little higher than this but no lower. If for example the total alkalinity of a swimming pool is 200 my suggestion would be not to lower it. If you choose to lower the level it can be done by adding acid over the course of several days. It involves adding acid to lower the ph, waiting 24hrs for it to come back up,retesting, adding more acid, waiting 24hrs, retesting and so on until the alkalinity is correct. By doing this most people bottom out their ph and alkalinity and have to add alkalinity increaser to raise everything back up. If this sounds like a lot of troube and a waste of time thats because it is. If the alkalinity is a little high, leave it alone. It wont hurt anything.

If  the alkalinity in your pool is to low raising it is as simple as adding alkalinity increaser. The instructions on the container will guide you on how much to add.

Some things that can cause a drop in alkalinity are rain water entering the pool water and swimmers who don’t exit the water to go to the bathroom. Rain can be acidic and so is urine. I have some customers that are farmers and they have said that some of the fertilizers they use in there fields get airborne and lower the ph and alkalinity of their pool water.

No matter what lowered the alkalinity of the water it is important to maintain the correct levels for your pool. By not doing so your ph will always be low and this is hazardous to you and your swimming pool equipment. So remember to always check your ph weekly and if its low check the alkalinity of the water. It could be the reason that the ph won’t stay up.

Be Sociable, Share!
Tagged as: , , ,

Leave a Response

Please note: comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

Spam Protection by WP-SpamFree